On Thu, Feb 04, 2010 at 09:07:59AM -0800, Bill Blackford wrote: > I'm running a mixed environment of Juniper and Cisco and have noticed > some odd behavior with some of iBGP peers. It's my understanding that > Junos has no equivalent to the Cisco 'update-source loobback0'. I > haven't run into to problems peering with the respective loopback > between a Cisco to Juniper but have with a Juniper to Juniper (that is > attempting to bring the peers up via the loopbacks). Although my tests > were limited and lack too many details, I'm curious if anyone has run > up against this issue and what your recommendations are.
The issue I was talking about previously was when carrying multiple AFI's and trying to do next-hop self on an IPv6 next-hop while using an IPv4 neighbor. You should be fine with local-address and next-hop self if you're just doing IPv4 next-hops. -- Richard A Steenbergen <[email protected]> http://www.e-gerbil.net/ras GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC) _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
