I hope I'm not hijacking this thread. I notice on the Juniper site that the current recommended is 10.0S1.1 with no MD5SUM. I have 9.3S1.6 in production on a large portion of my rack switches. For devices doing routing, I have a 9.5R2.7 as I needed some features not implemented in 9.3. I can't find a link for 9.5SR2. I can only assume Juniper removes the current recommended service release when a newer one is available.
Is there a link that shows all of the "S" releases along with checksums? Is anyone running 10.0S1.1? Thank you, -b -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Murphy, Jay, DOH Sent: Monday, February 08, 2010 3:26 PM To: [email protected]; Dan Farrell; [email protected]; [email protected]; Paul Waller Cc: [email protected] Subject: Re: [j-nsp] EX 3200 - no arp entries after power failure 9.5SR2 is the better platform to use in your EX3200. Especially in the enterprise, dudes. ~Jay Murphy IP Network Specialist NM State Government IT Services Division PSB – IP Network Management Center Santa Fé, New México 87505 "We move the information that moves your world." “Good engineering demands that we understand what we’re doing and why, keep an open mind, and learn from experience.” “Engineering is about finding the sweet spot between what's solvable and what isn't." Radia Perlman Please consider the environment before printing e-mail -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Monday, February 08, 2010 4:03 PM To: Dan Farrell; [email protected]; [email protected]; Paul Waller Cc: [email protected] Subject: Re: [j-nsp] EX 3200 - no arp entries after power failure Dan Just an fyi. If you have igmp snooping enabled traffic destined to groups 224.0.0.0/24 doesn't get flooded as it should. Hoepfully you don't have anything that uses that address space. I found this bug a few weeks ago. JTAC committed the fix in 10.0R3. I love how new releases are breaking previously functioning features. JUNOS is so buggy anymore. Juniper is going through the growth pains that Cisco went through years ago. Chris Sent via BlackBerry by AT&T -----Original Message----- From: Dan Farrell <[email protected]> Date: Mon, 8 Feb 2010 13:56:36 To: [email protected]<[email protected]>; Paul Waller<[email protected]> Cc: [email protected]<[email protected]> Subject: Re: [j-nsp] EX 3200 - no arp entries after power failure Believe it or not, 10.0.r2 is working like a charm for us so far. So far. Dan Farrell -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Malte von dem Hagen Sent: Monday, February 08, 2010 3:57 PM To: Paul Waller Cc: [email protected] Subject: Re: [j-nsp] EX 3200 - no arp entries after power failure Hi, Am 08.02.10 21:33 schrieb Paul Waller: > We have a EX 3200 running JunOS 9.2R2 release. you really should upgrade. 9.2R2 is really old, and early versions of JunOS for EX series contained lots of nasty bugs. 9.6R3 seems quite stable so far... rgds, Malte -- Malte v. dem Hagen Teamleitung Network Engineering & Operation Abteilung Technik ----------------------------------------------------------------------- Host Europe GmbH - http://www.hosteurope.de Welserstraße 14 - 51149 Köln - Germany Telefon: 0800 467 8387 - Fax: +49 180 5 66 3233 (*) HRB 28495 Amtsgericht Köln - USt-IdNr.: DE187370678 Geschäftsführer: Uwe Braun - Alex Collins - Mark Joseph - Patrick Pulvermüller (*) 0,14 EUR/Min. aus dem dt. Festnetz, Mobilfunkpreise ggf. abweichend __________ Information from ESET NOD32 Antivirus, version of virus signature database 4849 (20100208)__________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __________ Information from ESET NOD32 Antivirus, version of virus signature database 4849 (20100208)__________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp ______________________________________________________________________ This inbound email has been scanned for malicious software and transmitted safely to you using Webroot Email Security. ______________________________________________________________________ This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. ______________________________________________________________________ Confidentiality Notice: This e-mail,including all attachments is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review,use,disclosure or distribution is prohibited unless specifically provided under the New Mexico Inspection of Public Records Act. If you are not the intended recipient, please contact the sender and destroy all copies of this message. This email has been scanned using Webroot Email Security. ______________________________________________________________________ _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
