> On M/T-series you need a tunnel PIC to provide an lt interface. Not necessarily. From an M7i with built-in ASP (i.e. the built-in version of the AS PIC):
FPC 1 E-FPC PIC 2 REV 05 750-015931 PX6751 ASP - Integrated (Layer-2-3) [email protected]> show interfaces lt-1/2/0 Physical interface: lt-1/2/0, Enabled, Physical link is Up Interface index: 140, SNMP ifIndex: 511 Type: Logical-tunnel, Link-level type: Logical-tunnel, MTU: Unlimited, Speed: 800mbps Device flags : Present Running Interface flags: Point-To-Point SNMP-Traps Link flags : None Physical info : 13 Current address: 00:1f:12:a5:a4:bc, Hardware address: 00:1f:12:a5:a4:bc Last flapped : 2009-11-26 01:00:02 CET (16w4d 16:06 ago) Input rate : 0 bps (0 pps) Output rate : 0 bps (0 pps) Steinar Haug, Nethelp consulting, [email protected] _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
