> -----Original Message----- > From: [email protected] [mailto:juniper-nsp- > [email protected]] On Behalf Of Jonathan Looney > Sent: Monday, March 22, 2010 12:20 PM > To: [email protected] > Cc: [email protected] > Subject: Re: [j-nsp] logical routers on M10i > > The M7i is a special case. It either comes with a built-in tunnel PIC, or > a > built-in ASM. However, the built-in ASM on the M7i retains the logical > tunnel feature you would otherwise get with the default built-in tunnel > PIC. > > For all other M/T platforms, I believe Stacy is correct. > > -Jon >
Our AS II PIC provides tunnel services, even when running in layer-2 mode: u...@router1-re0> show chassis hardware detail | match "PIC 3" PIC 3 REV 03 750-012924 xxxxx AS2 Layer-2 Services u...@router1-re0> show interfaces lt-0/2/0 Physical interface: lt-0/2/0, Enabled, Physical link is Up ... This is in an M20 w/ FPC-E. However, in our M10i, it doesn't work and you might have to enable 'layer-2-3' or 'layer-3' for that PIC for lt functionality (sorry, can't risk trying it myself on production equipment :-) ): set chassis fpc X pic X adaptive-services service-package [ layer-2-3 layer-3 ] -evt _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
