On Tue, Mar 23, 2010 at 03:48:21PM +0100, Wouter van den Bergh wrote: > Mar 22 16:14:20 chas[796]: link 1 SFP receive power low warning set > Mar 22 16:14:40 chas[796]: link 1 SFP receive power low warning cleared > > Does anyone know how I can link this to the interface these messages come > from? It doesn't seem to appear anywhere in the logfiles.
try: show interfaces diagnostics optics ge-x/y/z where x/y/z is where you have SFP interfaces, and look for low values in the "Receiver signal average optical power" field. Unfortunately, you can't run the command without specifying each specific interface, one at a time--oh wait! That now works in 10.1R1! show interfaces diagnostics optics shows output for each of the interfaces that has DOM capabilities. Not sure when they enhanced that, but it didn't do that in 9.5R2. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
