If there is not an OID you can make one for the purpose; see the jnxUtilityMib and automation scripts.
Truman On 8/04/2010, at 8:28 AM, Bjørn Tore Paulen wrote: > Richard A Steenbergen skrev: > >> (...) >> Hrm... The lack of ability to do "show interfaces diagnostic optics" and >> see all interfaces has been on my bitch-list for the last 3+ years. I >> had just given up hope that they were ever going to do anything to fix >> it (or support the reverse order "show interface xe-0/0/0 diagnostics >> optics" for that matter), so I had stopped even checking... But after >> reading this email I just went back and checked a bunch of boxes, and it >> actually IS working on MX on every version of code we're running (9.4R3 >> being the oldest). Guess they slipped it in when we weren't looking. >> > But still not possible to graph this? I.e. any working OID? > > /BT > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
