Matrin, We have been experiencing kernel memory leaks on a EX4200 virtual chassis containing 2 devices after we upgraded to a 10 release. We were supplied version 10.0S3.1 to fix these problems. You might want to give that version a try and see if our problems were related.
Regards, Wouter -----Oorspronkelijk bericht----- Van: [email protected] [mailto:[email protected]] Namens Martin Levin Verzonden: dinsdag 30 maart 2010 15:53 Aan: [email protected] Onderwerp: [j-nsp] High memory usage on EX4200 stack Hi! We have 3 EX4200 virtual chassis all running 10.0S1.1, one consisting of 4 EX4200 and the other two och two switches each. The problem below only affects the two stacks with two switches each, the 2 switch stack does not se this. The problem we're seeing is that member 0, regardless of wether its the master routing engine or not sees very high memory usage (89%) and the boxes then become very slow. These switches operate on layer 2 only. If I try to do "request session member 0" i get "could not create child process" as an error and I can't login to that member. Traffic seems to flow without problem however. Any thoughts? --- Martin Levin IT-strategy & planning Mölndals stad _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
