You need the following: 'set routing-option forwarding-table export load-balance'
and 'set policy-options policy-statement load-balance then load-balance per-packet' Sorry for the top-post, I'm on my Blackberry. HTHs. Stefan Fouant ------Original Message------ From: Gabriel Farias Sender: [email protected] To: [email protected] Subject: [j-nsp] Load Balance in VRF by Junos Sent: Mar 31, 2010 4:23 PM Hi members, How to balance traffic between EBGP equipment Juniper M120 (PE) x Cisco 6509 (CE) Switch, which are connected via ethernet aggregated? I used the setup below and did not work the Juniper continues with the output unbalanced traffic. configuration forwarding-options load-balance { indexed-next-hop; } hash-key { family inet { layer-3; layer-4; } } Thanks, Gabriel Farias _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp Sent from my Verizon Wireless BlackBerry _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
