Dear All, I am facing issue with Juniper E120. Its ports are flapping every every two to three months. We opened the case with Jtec as well and they are asking to upgrade the junos. Any idea why it is happening, today i checked the logs after flapping and logs says:
ERROR 06/15/2010 22:40:09 GMT+3 ipProfileMgr: doDcmIpIntfCreate : Creation of IP interface/address failed with status: lower layer bind failed ERROR 06/15/2010 22:51:06 GMT+3 dosProtection: Flow is suspicious: GigabitEthernet0/0/3.10102.255041 for control protocol: IP Normal Path MTU source might be on slot 0 with rate 85 pps ERROR 06/15/2010 22:51:18 GMT+3 dosProtection: Flow is suspicious: GigabitEthernet0/0/3.10107.8939 for control protocol: IP Normal Path MTU source might be on slot 0 with rate 110 pps What i get from these logs is we went under dos attack and i guess this is always the case when our ports flaps. Can anyone help me out if this is possible to disable the flapping of the port if it is by default on some threshold. Regards, Raheel _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
