> -----Original Message----- > From: [email protected] [mailto:juniper-nsp- > [email protected]] On Behalf Of Fahad Khan > Sent: Friday, July 16, 2010 7:52 AM > To: [email protected] > Subject: [j-nsp] SRX CPU utilization reaches 100% > > I faced that SRX CPU utilization reaches to 100% suddenly after configuring > three policies with address groups of 90 addresses. And then the telnet > session was also broken for 2 mins approx but resume after that time. > > has any body experienced this? I am using junos 10.0R3.10 (recommended > version)
Does the CPU remain at 100%, or just for two minutes and then fall to a more acceptable level? Is this an SRX 100 by any chance? Stefan Fouant, CISSP, JNCIEx2 www.shortestpathfirst.net GPG Key ID: 0xB5E3803D _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
