Yes, it came back to normal with in this time and this is SRX3600 in chassis cluster.
regards, Muhammad Fahad Khan JNCIP - M/T # 834 IT Specialist Global Technology Services, IBM [email protected] +92-301-8247638 Skype: fahad-ibm http://www.linkedin.com/in/muhammadfahadkhan On Fri, Jul 16, 2010 at 5:44 PM, Stefan Fouant < [email protected]> wrote: > > -----Original Message----- > > From: [email protected] [mailto:juniper-nsp- > > [email protected]] On Behalf Of Fahad Khan > > Sent: Friday, July 16, 2010 7:52 AM > > To: [email protected] > > Subject: [j-nsp] SRX CPU utilization reaches 100% > > > > I faced that SRX CPU utilization reaches to 100% suddenly after > configuring > > three policies with address groups of 90 addresses. And then the telnet > > session was also broken for 2 mins approx but resume after that time. > > > > has any body experienced this? I am using junos 10.0R3.10 (recommended > > version) > > Does the CPU remain at 100%, or just for two minutes and then fall to a > more > acceptable level? Is this an SRX 100 by any chance? > > Stefan Fouant, CISSP, JNCIEx2 > www.shortestpathfirst.net > GPG Key ID: 0xB5E3803D > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
