Does anyone know how to configure a GRE tunnel on the MX platform withOUT
a Multiservices DPC?
I *thought* that you can somehow "steal" resources from a line card to
create a GRE tunnel on the MX, but I have not found an example of how to
do that. I do not need much bandwidth, so the Multiservices DPC is just
overkill for this application.
I can create a "gr" interface in the config, but after commiting the
config the "gr" interface does not show up:
[edit interface gr-1/0/1]
unit 0 {
tunnel {
source 192.168.0.1;
destination 192.168.1.1;;
}
family inet {
address 10.0.0.1/30;
}
}
show interfaces gr-1/0/1
error: device gr-1/0/1 not found
I know that you can build a "logical tunnel" to create connections within
a router, but I need a GRE tunnel to connect to an external router. Are
the methods similar?
Any ideas?
Clarke Morledge
College of William and Mary
Information Technology - Network Engineering
Jones Hall (Room 18)
Williamsburg VA 23187
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
