You can configure tunnel services under chassis fpc pic... Devang Patel (Sent from my iPhone)
On Sep 8, 2010, at 6:24 PM, Chris Evans <[email protected]> wrote: > Can't remember the syntax as I'm on my phone. But do.'set chassis fpc (line > card number)' Its a command under there. > > Hth > > Chris >> Does anyone know how to configure a GRE tunnel on the MX platform withOUT >> a Multiservices DPC? >> >> I *thought* that you can somehow "steal" resources from a line card to >> create a GRE tunnel on the MX, but I have not found an example of how to >> do that. I do not need much bandwidth, so the Multiservices DPC is just >> overkill for this application. >> >> I can create a "gr" interface in the config, but after commiting the >> config the "gr" interface does not show up: >> >> [edit interface gr-1/0/1] >> >> unit 0 { >> tunnel { >> source 192.168.0.1; >> destination 192.168.1.1;; >> } >> family inet { >> address 10.0.0.1/30; >> } >> } >> >> >>> show interfaces gr-1/0/1 >> error: device gr-1/0/1 not found >> >> I know that you can build a "logical tunnel" to create connections within >> a router, but I need a GRE tunnel to connect to an external router. Are >> the methods similar? >> >> Any ideas? >> >> Clarke Morledge >> College of William and Mary >> Information Technology - Network Engineering >> Jones Hall (Room 18) >> Williamsburg VA 23187 >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
