People,
Does anyone uses SRX routers for MPLS (VPLS) Transport ?
We are thinking about the use of SRX220 under some conditions:
- Use it in a not a good environment without air conditioning and a lot
of dust ... external box temperature rises from 35 to 42 Celsius.
- Be the point to interconnect POPs using point to point radios
(100~1000 Mbps)
- Using it to provide a VPLS infrastructure for L2 transport and client
isolation until the start of the backbone (M7i and MX80 Routers)
- SRX220 to provide OSPFv2 and OSPFv3 L3 gateway for some routed clients.
The figure showed at the following link tries to resume it at all:
http://www.wztech.com.br/JUNIPER/Topology.png
It is possible to use this box in a such project ? Do you have any
experience using it to do this type of topology ?
Is is possible that SRX220 can work fine under so strength environment
conditions ? Could it blow up or goes down ?
If someone has implemented this kind of environment can please share the
experiences ?
Thanks a lot,
Giuliano
_______________________________________________
juniper-nsp mailing list juniper-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/juniper-nsp
