Hi Giuliano, We do not support MPLS on SRX platforms.
Thanks & Regards, Jai ----- Original Message ----- From: juniper-nsp-boun...@puck.nether.net <juniper-nsp-boun...@puck.nether.net> To: juniper-nsp@puck.nether.net <juniper-nsp@puck.nether.net> Sent: Thu Oct 21 19:48:46 2010 Subject: [j-nsp] SRX for MPLS People, Does anyone uses SRX routers for MPLS (VPLS) Transport ? We are thinking about the use of SRX220 under some conditions: - Use it in a not a good environment without air conditioning and a lot of dust ... external box temperature rises from 35 to 42 Celsius. - Be the point to interconnect POPs using point to point radios (100~1000 Mbps) - Using it to provide a VPLS infrastructure for L2 transport and client isolation until the start of the backbone (M7i and MX80 Routers) - SRX220 to provide OSPFv2 and OSPFv3 L3 gateway for some routed clients. The figure showed at the following link tries to resume it at all: http://www.wztech.com.br/JUNIPER/Topology.png It is possible to use this box in a such project ? Do you have any experience using it to do this type of topology ? Is is possible that SRX220 can work fine under so strength environment conditions ? Could it blow up or goes down ? If someone has implemented this kind of environment can please share the experiences ? Thanks a lot, Giuliano _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list juniper-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/juniper-nsp