Hi all, Also please see the show ospf route detail output from boh routers,
R1, [email protected]> show ospf route detail Topology default Route Table: Prefix Path Route NH Metric NextHop Nexthop Type Type Type Interface Address/LSP 10.100.9.16/32 Intra Network IP 0 lo0.0 area 0.0.0.0, origin 10.100.9.16, priority low R2, R2> show ospf route detail Topology default Route Table: Prefix Path Route NH Metric NextHop Nexthop Type Type Type Interface Address/LSP 10.100.9.1 Intra AS BR IP 1 ge-0/0/0.50 10.100.0.241 area 0.0.0.0, origin 10.100.9.1, optional-capability 0x2 10.100.9.2 Intra AS BR IP 2 ge-0/0/0.50 10.100.0.241 area 0.0.0.0, origin 10.100.9.2, optional-capability 0x2 10.100.9.4 Intra AS BR IP 2 ge-0/0/0.50 10.100.0.241 area 0.0.0.0, origin 10.100.9.4, optional-capability 0x2 10.100.9.5 Intra AS BR IP 2 ge-0/0/0.50 10.100.0.241 area 0.0.0.0, origin 10.100.9.5, optional-capability 0x2 10.100.9.13 Intra AS BR IP 1 ge-0/0/0.55 10.100.0.35 area 0.0.0.0, origin 10.100.9.13, optional-capability 0x2 10.100.9.18 Intra AS BR IP 1 ge-0/0/0.55 10.100.0.40 area 0.0.0.0, origin 10.100.9.18, optional-capability 0x2 10.100.9.20 Intra AS BR IP 1 ge-0/0/0.55 10.100.0.42 area 0.0.0.0, origin 10.100.9.20, optional-capability 0x2 10.100.9.25 Intra AS BR IP 1 ge-0/0/0.55 10.100.0.47 area 0.0.0.0, origin 10.100.9.25, optional-capability 0x2 10.100.9.39 Intra Router IP 1 ge-0/0/0.50 10.100.0.245 area 0.0.0.0, origin 10.100.9.39, optional-capability 0x0 10.100.9.41 Intra AS BR IP 1 ge-0/0/0.50 10.100.0.246 area 0.0.0.0, origin 10.100.9.41, optional-capability 0x2 0.0.0.0/0 Ext2 Network IP 0 ge-0/0/0.50 10.100.0.241 area 0.0.0.0, origin 10.100.9.1, priority medium 10.100.0.0/27 Intra Network IP 2 ge-0/0/0.50 10.100.0.241 area 0.0.0.0, origin 10.100.9.5, priority medium 10.100.0.32/27 Intra Network IP 1 ge-0/0/0.55 area 0.0.0.0, origin 10.100.9.25, priority low 10.100.0.128/27 Intra Network IP 2 ge-0/0/0.50 10.100.0.245 area 0.0.0.0, origin 10.100.9.39, priority medium 10.100.0.160/27 Ext2 Network IP 0 ge-0/0/0.50 10.100.0.246 area 0.0.0.0, origin 10.100.9.41, priority medium 10.100.0.240/28 Intra Network IP 1 ge-0/0/0.50 area 0.0.0.0, origin 10.100.9.1, priority low 10.100.1.0/28 Ext2 Network IP 0 ge-0/0/0.50 10.100.0.241 area 0.0.0.0, origin 10.100.9.4, priority medium 10.100.1.16/28 Intra Network IP 2 ge-0/0/0.50 10.100.0.241 area 0.0.0.0, origin 10.100.9.1, priority medium 10.100.1.32/28 Ext2 Network IP 0 ge-0/0/0.50 10.100.0.241 area 0.0.0.0, origin 10.100.9.2, priority medium 10.100.1.64/28 Ext2 Network IP 0 ge-0/0/0.50 10.100.0.241 area 0.0.0.0, origin 10.100.9.5, priority medium 10.100.1.176/28 Intra Network IP 2 ge-0/0/0.50 10.100.0.241 area 0.0.0.0, origin 10.100.9.1, priority medium 10.100.2.16/28 Intra Network IP 2 ge-0/0/0.55 10.100.0.40 area 0.0.0.0, origin 10.100.9.18, priority medium 10.100.2.19/32 Ext2 Network IP 0 ge-0/0/0.55 10.100.0.40 area 0.0.0.0, origin 10.100.9.18, priority medium 10.100.2.32/28 Intra Network IP 2 ge-0/0/0.55 10.100.0.47 area 0.0.0.0, origin 10.100.9.25, priority medium 10.100.2.48/28 Intra Network IP 2 ge-0/0/0.55 10.100.0.42 area 0.0.0.0, origin 10.100.9.20, priority medium 10.100.2.55/32 Ext2 Network IP 0 ge-0/0/0.55 10.100.0.42 area 0.0.0.0, origin 10.100.9.20, priority medium 10.100.2.56/32 Ext2 Network IP 0 ge-0/0/0.55 10.100.0.42 area 0.0.0.0, origin 10.100.9.20, priority medium 10.100.2.80/28 Intra Network IP 2 ge-0/0/0.55 10.100.0.40 area 0.0.0.0, origin 10.100.9.18, priority medium 10.100.2.87/32 Ext2 Network IP 0 ge-0/0/0.55 10.100.0.40 area 0.0.0.0, origin 10.100.9.18, priority medium 10.100.2.128/28 Intra Network IP 2 ge-0/0/0.55 10.100.0.35 area 0.0.0.0, origin 10.100.9.13, priority medium 10.100.5.0/28 Intra Network IP 2 ge-0/0/0.50 10.100.0.245 area 0.0.0.0, origin 10.100.9.39, priority medium 10.100.6.0/28 Ext2 Network IP 0 ge-0/0/0.50 10.100.0.246 area 0.0.0.0, origin 10.100.9.41, priority medium 10.100.9.1/32 Ext2 Network IP 0 ge-0/0/0.50 10.100.0.241 area 0.0.0.0, origin 10.100.9.1, priority medium 10.100.9.2/32 Ext2 Network IP 0 ge-0/0/0.50 10.100.0.241 area 0.0.0.0, origin 10.100.9.2, priority medium 10.100.9.4/32 Ext2 Network IP 0 ge-0/0/0.50 10.100.0.241 area 0.0.0.0, origin 10.100.9.4, priority medium 10.100.9.5/32 Ext2 Network IP 0 ge-0/0/0.50 10.100.0.241 area 0.0.0.0, origin 10.100.9.5, priority medium 10.100.9.13/32 Intra Network IP 1 ge-0/0/0.55 10.100.0.35 area 0.0.0.0, origin 10.100.9.13, priority medium 10.100.9.18/32 Intra Network IP 1 ge-0/0/0.55 10.100.0.40 area 0.0.0.0, origin 10.100.9.18, priority medium 10.100.9.20/32 Intra Network IP 1 ge-0/0/0.55 10.100.0.42 area 0.0.0.0, origin 10.100.9.20, priority medium 10.100.9.25/32 Intra Network IP 1 ge-0/0/0.55 10.100.0.47 area 0.0.0.0, origin 10.100.9.25, priority medium 10.100.9.39/32 Intra Network IP 1 ge-0/0/0.50 10.100.0.245 area 0.0.0.0, origin 10.100.9.39, priority medium 10.100.9.41/32 Ext2 Network IP 0 ge-0/0/0.50 10.100.0.246 area 0.0.0.0, origin 10.100.9.41, priority medium 10.111.1.0/30 Ext2 Network IP 0 ge-0/0/0.55 10.100.0.40 area 0.0.0.0, origin 10.100.9.18, priority medium 82.98.222.32/27 Intra Network IP 2 ge-0/0/0.50 10.100.0.241 area 0.0.0.0, origin 10.100.9.1, priority medium 192.168.0.24/30 Ext2 Network IP 0 ge-0/0/0.50 10.100.0.241 area 0.0.0.0, origin 10.100.9.1, priority medium 192.168.0.28/30 Ext2 Network IP 0 ge-0/0/0.50 10.100.0.241 area 0.0.0.0, origin 10.100.9.1, priority medium 192.168.1.0/24 Ext2 Network IP 0 ge-0/0/0.50 10.100.0.246 area 0.0.0.0, origin 10.100.9.41, priority medium Thanks, Gokhan On Mon, Dec 27, 2010 at 5:00 PM, Smith W. Stacy <[email protected]> wrote: > Can you provide the output of 'show ospf database extensive' and 'show ospf > route detail' from both routers? > > --Stacy > > > On Dec 27, 2010, at 8:48 AM, Gökhan Gümüş wrote: > > > Hi all, > > > > I have two Juniper SRX 210 router which are connected via VPLS. > > VPLS is up and running. > > I am using 10.1R1.8 version on both boxes. > > My question is even if OSPF is up and running, routes are not being > > exchanged each other. > > I am accepting all OSPF traffic on security zones. > > > > R1> show configuration protocols ospf > > > > export static-direct-to-ospf; > > area 0.0.0.0 { > > interface ge-0/0/0.55; > > interface lo0.0; > > > > R1> show configuration interfaces ge-0/0/0.55 > > vlan-id 55; > > family inet { > > address 10.100.0.38/27; > > } > > > > R1> show configuration interfaces lo0 > > unit 0 { > > family inet { > > address 10.100.9.16/32; > > > > > > ------------------------------------------------------------------------ > > > > R2> show configuration protocols ospf > > > > export static-direct-to-ospf; > > area 0.0.0.0 { > > interface ge-0/0/0.50 { > > priority 128; > > } > > interface ge-0/0/0.55 { > > priority 255; > > > > R2> show configuration interfaces ge-0/0/0.55 > > description "[DCN-UK]"; > > vlan-id 55; > > family inet { > > address 10.100.0.34/27; > > } > > > > R2> show configuration interfaces lo0 > > unit 0 { > > family inet { > > address 10.100.9.12/32 { > > primary; > > preferred; > > } > > address 127.0.0.1/32; > > > > R1> show ospf neighbor > > Address Interface State ID Pri > Dead > > 10.100.0.34 ge-0/0/0.55 Full 10.100.9.12 255 > 36 > > > > R1> show route > > > > inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden) > > + = Active Route, - = Last Active, * = Both > > > > 10.100.0.32/27 *[Direct/0] 16:20:03 > >> via ge-0/0/0.55 > > 10.100.0.38/32 *[Local/0] 16:20:08 > > Local via ge-0/0/0.55 > > 10.100.2.96/28 *[Direct/0] 16:18:41 > >> via vlan.0 > > 10.100.2.110/32 *[Local/0] 16:21:05 > > Local via vlan.0 > > 10.100.9.16/32 *[Direct/0] 16:21:20 > >> via lo0.0 > > 224.0.0.5/32 *[OSPF/10] 16:21:21, metric 1 > > MultiRecv > > > > > > ------------------------------------------------ > > > > R2> show ospf neighbor > > Address Interface State ID Pri > Dead > > 10.100.0.38 ge-0/0/0.55 Full 10.100.9.16 128 > 31 > > > > R2> show route > > > > 10.100.2.19/32 *[OSPF/150] 16:30:39, metric 0, tag 0 > >> to 10.100.0.40 via ge-0/0/0.55 > > 10.100.2.32/28 *[OSPF/10] 16:30:39, metric 2 > >> to 10.100.0.47 via ge-0/0/0.55 > > 10.100.2.48/28 *[OSPF/10] 16:17:38, metric 2 > >> to 10.100.0.42 via ge-0/0/0.55 > > 10.100.2.55/32 *[OSPF/150] 16:17:38, metric 0, tag 0 > >> to 10.100.0.42 via ge-0/0/0.55 > > > > Is there anyone who might explain that strange behaviour? > > > > Thanks, > > Gokhan > > _______________________________________________ > > juniper-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
