Hi!
Could you please copy the detail of the policy you are applying also?
Thanks
Cristian
El 27/12/2010 12:48, Gökhan Gümüş escribió:
Hi all,
I have two Juniper SRX 210 router which are connected via VPLS.
VPLS is up and running.
I am using 10.1R1.8 version on both boxes.
My question is even if OSPF is up and running, routes are not being
exchanged each other.
I am accepting all OSPF traffic on security zones.
R1> show configuration protocols ospf
export static-direct-to-ospf;
area 0.0.0.0 {
interface ge-0/0/0.55;
interface lo0.0;
R1> show configuration interfaces ge-0/0/0.55
vlan-id 55;
family inet {
address 10.100.0.38/27;
}
R1> show configuration interfaces lo0
unit 0 {
family inet {
address 10.100.9.16/32;
------------------------------------------------------------------------
R2> show configuration protocols ospf
export static-direct-to-ospf;
area 0.0.0.0 {
interface ge-0/0/0.50 {
priority 128;
}
interface ge-0/0/0.55 {
priority 255;
R2> show configuration interfaces ge-0/0/0.55
description "[DCN-UK]";
vlan-id 55;
family inet {
address 10.100.0.34/27;
}
R2> show configuration interfaces lo0
unit 0 {
family inet {
address 10.100.9.12/32 {
primary;
preferred;
}
address 127.0.0.1/32;
R1> show ospf neighbor
Address Interface State ID Pri Dead
10.100.0.34 ge-0/0/0.55 Full 10.100.9.12 255 36
R1> show route
inet.0: 6 destinations, 6 routes (6 active, 0 holddown, 0 hidden)
+ = Active Route, - = Last Active, * = Both
10.100.0.32/27 *[Direct/0] 16:20:03
> via ge-0/0/0.55
10.100.0.38/32 *[Local/0] 16:20:08
Local via ge-0/0/0.55
10.100.2.96/28 *[Direct/0] 16:18:41
> via vlan.0
10.100.2.110/32 *[Local/0] 16:21:05
Local via vlan.0
10.100.9.16/32 *[Direct/0] 16:21:20
> via lo0.0
224.0.0.5/32 *[OSPF/10] 16:21:21, metric 1
MultiRecv
------------------------------------------------
R2> show ospf neighbor
Address Interface State ID Pri Dead
10.100.0.38 ge-0/0/0.55 Full 10.100.9.16 128 31
R2> show route
10.100.2.19/32 *[OSPF/150] 16:30:39, metric 0, tag 0
> to 10.100.0.40 via ge-0/0/0.55
10.100.2.32/28 *[OSPF/10] 16:30:39, metric 2
> to 10.100.0.47 via ge-0/0/0.55
10.100.2.48/28 *[OSPF/10] 16:17:38, metric 2
> to 10.100.0.42 via ge-0/0/0.55
10.100.2.55/32 *[OSPF/150] 16:17:38, metric 0, tag 0
> to 10.100.0.42 via ge-0/0/0.55
Is there anyone who might explain that strange behaviour?
Thanks,
Gokhan
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
