I guess I am going for the PCMCIA method. Thanks.
Regards, V.Vasilev On Tue, Jan 11, 2011 at 10:09 AM, Alex <[email protected]> wrote: > I believe if you reinstall FreeBSD on this disk (minimal install will do) it > will be recognised by "request system partition". > HTH > Regards > Alex > > ----- Original Message ----- From: "Vladislav Vasilev" > <[email protected]> > To: <[email protected]> > Sent: Tuesday, January 11, 2011 1:13 AM > Subject: [j-nsp] Hard Disk Replacement - M5 > > >> Hello, >> >> I am trying to replace a hard drive on an old M5 running JunOS 6.2. >> The RE installs the drive which can be seen from the following output: >> >> r...@m5> show system boot-messages >> >> ad0: 91MB <SanDisk SDCFB-96> [734/8/32] at ata0-master using PIO1 >> ad1: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-slave using UDMA33 >> Mounting root from ufs:/dev/ad0s1a >> >> The problem is that the RE won't partition it: >> >> r...@m5> request system partition hard-disk >> mount: /dev/ad1s1e: Device not configured >> ERROR: Can't access hard disk, aborting partition. >> >> The hard drive had been erased with dd. >> >> Has anyone come across this problem? Am I missing something here? >> >> Thank you! >> >> Kind Regards, >> V. Vasilev >> _______________________________________________ >> juniper-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/juniper-nsp >> > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
