Start a shell and you will have dd there. After that you can do request
system partition.
If you have an export-cf[512|1024] version of junos you can use it too.
On 11.01.2011 14:19, Vladislav Vasilev wrote:
I guess I am going for the PCMCIA method.
Thanks.
Regards,
V.Vasilev
On Tue, Jan 11, 2011 at 10:09 AM, Alex<[email protected]> wrote:
I believe if you reinstall FreeBSD on this disk (minimal install will do) it
will be recognised by "request system partition".
HTH
Regards
Alex
----- Original Message ----- From: "Vladislav Vasilev"
<[email protected]>
To:<[email protected]>
Sent: Tuesday, January 11, 2011 1:13 AM
Subject: [j-nsp] Hard Disk Replacement - M5
Hello,
I am trying to replace a hard drive on an old M5 running JunOS 6.2.
The RE installs the drive which can be seen from the following output:
r...@m5> show system boot-messages
ad0: 91MB<SanDisk SDCFB-96> [734/8/32] at ata0-master using PIO1
ad1: 11513MB<IBM-DARA-212000> [23392/16/63] at ata0-slave using UDMA33
Mounting root from ufs:/dev/ad0s1a
The problem is that the RE won't partition it:
r...@m5> request system partition hard-disk
mount: /dev/ad1s1e: Device not configured
ERROR: Can't access hard disk, aborting partition.
The hard drive had been erased with dd.
Has anyone come across this problem? Am I missing something here?
Thank you!
Kind Regards,
V. Vasilev
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
--
Regards,,,
Miroslav Georgiev
SpectrumNet Jsc.
+(359 2)4890604
+(359 2)4890619
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
