On 1/28/2011 2:16 PM, Richard A Steenbergen wrote:
On Fri, Jan 28, 2011 at 02:03:54PM -0800, Keith wrote:
Currently the box is running 10.2R1.8. It has a MIC-3D 20 port card,
MPC1, and RE-S-2000.
Juniper just put out a tech bulletin this morning admitting the obvious,
that 10.2R1/R2/R3 and 10.3R1 for Trio (MPC) cards are massively broken
and shouldn't be used. Try 10.3R2, it's been mostly ok for us (not
counting the bug we hit the other day where all the MPCs crashed in an
endless loop after updating a prefix-list referenced in a firewall
filter on them, but at least so far this seems rare :P). Alas 10.3R3
seems to be delayed, but you'll be far better off with 10.3R2 than you
will with 10.2R1 in the config above.
Thanks Richard. I see that 10.4R1.9 is out. Have you had a go at that
version yet?
Regards,
Keith
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
