On 1/28/11 2:35 PM, Keith wrote: > On 1/28/2011 2:16 PM, Richard A Steenbergen wrote: >> On Fri, Jan 28, 2011 at 02:03:54PM -0800, Keith wrote: >>> >>> Currently the box is running 10.2R1.8. It has a MIC-3D 20 port card, >>> MPC1, and RE-S-2000. >> >> Juniper just put out a tech bulletin this morning admitting the obvious, >> that 10.2R1/R2/R3 and 10.3R1 for Trio (MPC) cards are massively broken >> and shouldn't be used. Try 10.3R2, it's been mostly ok for us (not >> counting the bug we hit the other day where all the MPCs crashed in an >> endless loop after updating a prefix-list referenced in a firewall >> filter on them, but at least so far this seems rare :P). Alas 10.3R3 >> seems to be delayed, but you'll be far better off with 10.3R2 than you >> will with 10.2R1 in the config above. >> > > Thanks Richard. I see that 10.4R1.9 is out. Have you had a go at that > version yet?
I've got an outstanding bug on mx480 where rpd/vrrpd barf on native interfaces but not irb's in 10.4r1.9 > Regards, > Keith > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
