Hi all, I usually use something like that to generate a prefix-list of all known bgp-speakers on our boxes:
[edit policy-options prefix-list BGP-Speaker] teichhorn@router# show apply-path "protocols bgp group <*> neighbor <*>"; That works almost fine - but of course it includes v4 and v6 neighbors. That is not of a problem if using this prefix list in an IPv4 firewall - the v6 entries are simply ignored. But when using this prefix-list in an IPv6 firewall, it breaks because only the v4-IPs seems to be considered. So my idea was to filter down to specific groups - all IPv6 bgp groups end with "-6", so I tried: apply-path "protocols bgp group <*-6> neighbor <*>" and apply-path "protocols bgp group <*>-6 neighbor <*>" But none worked - and I haven't found some examples for mixing wildcard with specific strings in here. Has anybody any hint for me or even a better solution than my approach? Thanks, Tom _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
