Okay, please forget my request, apply-path "protocols bgp group <*>-6 neighbor <*> does work if you commit before "show | display inheritance".
It seems its too early for me, Tom Am 10.02.2011 11:19, schrieb Thomas Eichhorn: > Hi all, > > I usually use something like that to generate a prefix-list > of all known bgp-speakers on our boxes: > > [edit policy-options prefix-list BGP-Speaker] > teichhorn@router# show > apply-path "protocols bgp group <*> neighbor <*>"; > > That works almost fine - but of course it includes > v4 and v6 neighbors. That is not of a problem if using > this prefix list in an IPv4 firewall - the v6 entries are > simply ignored. > > But when using this prefix-list in an IPv6 firewall, > it breaks because only the v4-IPs seems to be considered. > > So my idea was to filter down to specific groups - all > IPv6 bgp groups end with "-6", so I tried: > > apply-path "protocols bgp group <*-6> neighbor <*>" > and > apply-path "protocols bgp group <*>-6 neighbor <*>" > > But none worked - and I haven't found some examples for > mixing wildcard with specific strings in here. > > Has anybody any hint for me or even a better solution > than my approach? > > Thanks, > Tom > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
