Hi David, You probably want to look into: http://www.juniper.net/techpubs/software/screenos/screenos6.3.0/630_ce_all.pdf
Should be in Routing -> Border Gateway Protocol. BTW, this covers BGP on screenos based devices and not junos devices. On Tue, Feb 1, 2011 at 3:22 AM, David Lubowa <[email protected]> wrote: > Hi Guys, > > I am pretty virgin when it comes to Juniper but i switched because i think > its amazing gear , i am trying to configure BGP on my SSG550M using a > private ASN( just for now ) to my upstream but i am not sure where to start > i have looked for some documentation online but i am still not yet > convinced > on which is the right documentation because the information is all > scattered. > > If someone could please point me in the right direction i would be happy , > FYI i setup BGP on cisco gear a couple of years ago and i understand the > basic facts of BGP but i am not sure exactly how to set it up on Juniper. > > Your help is highly appreciated. > > cheers > > > -- > > > > > > "I will not say i failed 1000 Times, I will say that i discovered there are > 1000 ways that can cause failure. ---- Thomas Edison" > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
