Almost forgot - make sure IGMP snooping is turned off on both VLANs as well.

On 08/03/2011, at 7:32 PM, Ben Dale wrote:

> Hi Pierre,
> 
> Yes this can be done - control link traffic on the branch SRXs is actually 
> sent 802.1Q tagged in VLAN 4094, so you'll need to make the interface you 
> plug into the control link a trunk on your EX.  
> 
> I would also recommend that you increase the MTU size of both your fabric 
> links (and the transport network in between the SRXs), as you'll need to be 
> able to carry the largest frame your revenue interfaces can receive wrapped 
> in a header (if traffic ingresses via one SRX and needs to egress the other). 
>  So if you're just using 1500 byte MTUs on your revenue ports, you'll need a 
> PMTU of 1632 over the links in between.
> 
> I'm sure in reality it's a lot less that this (132 bytes for a header seems 
> excessive), but these are what Juniper recommend right now.
> 
> Actually a quick google brings up this document which is quite comprehensive:
> 
> http://kb.juniper.net/library/CUSTOMERSERVICE/GLOBAL_JTAC/technotes/3500165-EN.pdf
> 
> Cheers,
> 
> Ben
> 
> On 08/03/2011, at 3:42 AM, Pierre-Yves Maunier wrote:
> 
>> Hello all,
>> 
>> I've been able to setup HA between two J2320 having the control and fabric
>> link in two separate vlans over EX switches and it works fine. It's even
>> told in the documentation :  "Define the interfaces used for the FAB
>> connection. These interfaces must be connected back to back, or through a
>> Layer 2 infrastructure, as shown in Figure 2".
>> 
>> I tried to do the same with a pair of SRX-240 without any success (tested in
>> 10.3R2.11 and 10.3R3.7). The interfaces must be connected back-to-back.
>> 
>> Anybody already succeded in doing control/fabric link over a layer 2
>> infrastructure with SRX hardware ? How did you do it ?
>> 
>> Thanks.
>> 
>> Regards,
>> 
>> --
>> Pierre-Yves Maunier
>> _______________________________________________
>> juniper-nsp mailing list [email protected]
>> https://puck.nether.net/mailman/listinfo/juniper-nsp
>> 
> 


_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp

Reply via email to