You may need to use the independent domain knob depending on your topology:
http://www.juniper.net/techpubs/en_US/junos10.4/topics/task/configuration/routing-independent-domain-attribute-set-disabling.html On Tue, Mar 8, 2011 at 9:08 AM, meryem Z <[email protected]> wrote: > > Hello Community , > > on an M320 router running junos 9.6 I had a problem of BGP routes hidden > due to BGP loops. So i used the command "set routing-instances <ri> > protocols bgp local-as <as> loops 2" > > to allow loops. > > but then i got the following error message : > > 'local-as' > Invalid loop count configured > error: configuration check-out > failed > > Any idea about this problem? > > Thank you. > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > -- Matthew Tighe [email protected] _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
