On Wed, May 11, 2011 at 03:33:27PM -0300, Cyn D. wrote: > Thanks all for the reply. > > I just did an intermediate level and it went through, but still with the > message "unexpected operator", which I've never seen before. Just want to > make sure there is no consequence with the "no-validate" option.
The consequence is, if there is something in your config which isn't supported under the new code, and you use "no-validate" to skip the checks that are supposed to catch this, you run the very real risk that your RE will come back up with no config at all. If all you're doing is upgrading a backup RE and you have console on it this is relatively easy to recover from, but if you're expecting your router to come back up and you have no other way to get into the device and recover it this could be the start of a very bad day. :) -- Richard A Steenbergen <[email protected]> http://www.e-gerbil.net/ras GPG Key ID: 0xF8B12CBC (7535 7F59 8204 ED1F CC1C 53AF 4C41 5ECA F8B1 2CBC) _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
