> -----Original Message----- > From: saurabh sood [mailto:[email protected]] > Sent: Saturday, June 25, 2011 10:18 AM > To: Stefan Fouant > Cc: [email protected] > Subject: Re: [j-nsp] Output for "show bgp summary" is showing different > on two REs > > Thanks for this good answer. > > Even I was thinking the same but unfortunately when I tried the same on > one of my other router then i saw the following: > > Master RE: > > {master} > lab> show bgp summary > Groups: 2 Peers: 2 Down peers: 0 > Table Tot Paths Act Paths Suppressed History Damp State > Pending > inet.0 0 0 0 0 0 > 0 > Peer AS InPkt OutPkt OutQ Flaps Last > Up/Dwn State|#Active/Received/Accepted/Damped... > 1.1.1.1 100 11 12 0 0 > 4:25 0/0/0/0 0/0/0/0 > 21.1.1.2 300 12 13 0 0 > 4:43 0/0/0/0 0/0/0/0 > > Backup RE: > > {backup} > lab> show bgp summary > Groups: 2 Peers: 2 Down peers: 0 > Table Tot Paths Act Paths Suppressed History Damp State > Pending > inet.0 0 0 0 0 0 > 0 > Peer AS InPkt OutPkt OutQ Flaps Last > Up/Dwn State|#Active/Received/Accepted/Damped... > 1.1.1.1 100 5 5 0 0 > 2:00 0/0/0/0 0/0/0/0 > 21.1.1.2 300 5 5 0 0 > 2:00 0/0/0/0 0/0/0/0 > > Please let me know your thoughts about this as it seems to be different > what we think.
Yeah this is very interesting indeed. I am not an expert when it comes to matters of redundant routing engine operations - let me ask you a question, when the Primary RE fails, does everything resume properly on the backup? Do you see adjacencies reforming, or is it seamless? Hopefully this is non-production so you can play with it a bit... Stefan Fouant JNCIE-M #513, JNCIE-ER #70, JNCI http://www.shortestpathfirst.net GPG Key ID: 0xB4C956EC _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
