The CX111 looks very similar the a CradlePoint device. Does Juniper OEM them?
-----Original Message----- From: Stefan Fouant [mailto:[email protected]] Sent: Friday, August 05, 2011 11:14 PM To: Ryan Finnesey Cc: <[email protected]> Subject: Re: [j-nsp] hardware DS1s J-Series or branch SRX would fit the bill here as you can easily meet your requirement with either platform. You can get the CX111 cellular bridge for 3G backup for these platforms. Since you don't need firewalling, SRX might be overkill however... Stefan Fouant JNCIE-M, JNCIE-ER, JNCIE-SEC, JNCI Technical Trainer, Juniper Networks http://www.shortestpathfirst.net http://www.twitter.com/sfouant Sent from my iPad On Aug 5, 2011, at 10:28 PM, "Ryan Finnesey" <[email protected]> wrote: > What would the group recommend in terms of Juniper hardware that we > can use at remote locations where we would install one or two DS1s? > This would be a TDM network witch we will run MPLS so no need for > firewall. If possible we would like to have the same box to be able > to support ISDN BRI and or 3G/4G wireless as a backup option. > > > > Cheers > > Ryan > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
