Hi Steinar I dont understand the differnce between Chassis wide VLAN and probably line card based Vlan. Can you help me understand the same. thanls
Regards Abhijeet.C ________________________________ From: "[email protected]" <[email protected]> To: [email protected] Cc: [email protected] Sent: Tuesday, August 30, 2011 12:21 PM Subject: Re: [j-nsp] Juniper QinQ problem > Recently, i had came cross a problem, the customer need me to configure > the QinQ in the MX960 products, i am wondering if there anyone had the > example of the QinQ configuration in the MX? Do you mean QinQ (dual tagged) *termination*? Or something else? Here is an example of a dual tagged customer (2 x 0x8100 tags) terminated on an MX: [email protected]> show configuration interfaces ge-0/0/9.976 vlan-tags outer 1012 inner 300; family inet { mtu 1500; address 10.232.46.1/30; } > Does the MX can end up the vlan in the line card, just like the ES line > card in the 7609-S? Not sure what you're asking about here. If you're asking whether the VLANs are global to the chassis, like normal LAN cards on a 7600, the answer is *no*. Steinar Haug, Nethelp consulting, [email protected] _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
