How about some output from "show interface ae4 detail" as well as the member interfaces when the ae goes down? By your configuration the ae interface should remain up as long as a single interface is still up.
Robert On Wed, Nov 23, 2011 at 3:00 AM, hani ibrahim <[email protected]>wrote: > Dear All, > > kindly i need you help in one problem with an aggregate interface , it > went down when any of its interfaces went down below is my configuration : > > MX480-Router> show configuration interfaces ge-0/2/6 > gigether-options { > 802.3ad ae4; > } > > MX480-Router> show configuration interfaces ge-0/2/7 > gigether-options { > 802.3ad ae4; > } > MX480-Router> show configuration interfaces ae4 > vlan-tagging; > aggregated-ether-options { > minimum-links 1; > link-speed 1g; > > unit 5 { > vlan-id 5; > family inet { > address 10.10.10.1/31; > } > > M320-Router> show configuration interfaces ge-0/2/6 > gigether-options { > 802.3ad ae4; > } > > M320-Router> show configuration interfaces ge-0/2/7 > gigether-options { > 802.3ad ae4; > } > M320-Router> show configuration interfaces ae4 > vlan-tagging; > aggregated-ether-options { > minimum-links 1; > link-speed 1g; > > unit 5 { > vlan-id 5; > family inet { > address 10.10.10.2/31; > } > > BR, > Hany > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
