Hi,
Try running LACP too:
set interfaces ae4 aggregated-ether-options lacp active
Regards,
Per
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of hani ibrahim
Sent: 23 November 2011 11:01
To: [email protected]
Subject: [j-nsp] aggregate interface get down
Dear All,
kindly i need you help in one problem with an aggregate interface , it went
down when any of its interfaces went down below is my configuration :
MX480-Router> show configuration interfaces ge-0/2/6
gigether-options {
802.3ad ae4;
}
MX480-Router> show configuration interfaces ge-0/2/7
gigether-options {
802.3ad ae4;
}
MX480-Router> show configuration interfaces ae4
vlan-tagging;
aggregated-ether-options {
minimum-links 1;
link-speed 1g;
unit 5 {
vlan-id 5;
family inet {
address 10.10.10.1/31;
}
M320-Router> show configuration interfaces ge-0/2/6
gigether-options {
802.3ad ae4;
}
M320-Router> show configuration interfaces ge-0/2/7
gigether-options {
802.3ad ae4;
}
M320-Router> show configuration interfaces ae4
vlan-tagging;
aggregated-ether-options {
minimum-links 1;
link-speed 1g;
unit 5 {
vlan-id 5;
family inet {
address 10.10.10.2/31;
}
BR,
Hany
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
