Hi, I understand that doing the origination from Junos is slightly different from Cisco.
Cisco: - configure the network statement in the "router bgp" - configure the null route (or as long as the routes is in the routing table) it will be available in the BGP routing table - when we do the "sh ip bgp x.x.x.x" in the cisco router where we originate x.x.x.x, it will be shown in the BGP routing table Junos: - configure discard static routes in "routing option" - configure the policy statement to match the prefix that we configure in the discard static route - configure the policy statement into the "export" policy to the bgp session that we want that origin routes to be announced - if we do "show route protocol bgp x.x.x.x" in the router where we originate the routes, we won't be able to see it int the BGP table. Question: 1. Is there a way to put the routes that we originate in to the BGP routing table in the same router? what i mean is, if i originate 100.100.100.0/24from router A, i also want to see 100.100.100.0/24 inside the BGP table in router A too (like cisco). Is this possible? 2. Is there any best practice to originate routes in Junos since it behave differently compare to cisco? Thank you. Regards, Affandi _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
