LAN-PHY only on EX4200/4500 as far as i know. -- Tim
On Tue, Feb 14, 2012 at 11:53 PM, Dale Shaw <[email protected]> wrote: > Hi, > > Potentially odd question here but does anyone know, from 1st hand > experience, whether WAN-PHY mode is supported on 10g interfaces in > EX-series devices? Specifically EX4200 and/or EX4500? > > I ask because we have a new carrier circuit being delivered in the > not-too-distant future and we need to plug something into it to test > it. Eventually we'll jam a SRX5800 with a 4x10GE DPC onto the end of > it but in the meantime it would be handy to terminate and test with > something .. smaller. > > The existing interfaces we have (provisioned before my time) > apparently needed to be configured with the "framing wan-phy" and > "optics-options wavelength 1550.12" configuration options. The framing > command auto-completes on an EX-series box but the optics-options > command is hidden. > > Couldn't find any definitive references in the product docs. > > cheers, > Dale > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
