Hi Isidoro, I guess the RE is hot insert-able. You just need to be sure that the JUNOS version on both the RE should be same (if you intend to run GRES and NSR). But to be safe you should do it in a maintenance window.
The primary RE (1st) should be in slot 0 and backup RE (2nd) should be in slot 1. After you insert the RE just synchronize the config on both the REs. # commit synchronize <<<<<<<command for synchronizing the config. let me know if you need any help. Thanks sachin > Date: Mon, 5 Mar 2012 17:22:54 +0100 > From: [email protected] > To: [email protected] > Subject: [j-nsp] M20: Adding a second RE > > Hello, > > We purchased a second RE600 (we had only one RE600). Does anyone know a > procedure for adding a second RE?. The new RE has the same version and > configuration as the RE installed. Do you have any recommendations of > previous changes in the configuration? . > > > PS:Junos /7.3R1.4 > > /Thanks > > Isidoro > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
