I have a number of the EX4200-48P switches with dual 930w PS racked and have had no problems. They sag some but not as much as I have seen with other equipment. If you are leaving space between them, you could use a 1u blanking plate on the back of a 2 post for support. The metal kind anyway. The plastic ones won't be much help. I'd worry if I was in a seismically active area.
From: Brian Dantzig Senior Network Engineer Medline Industries, Inc. phone: 847.837.2795 [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of James Baker Sent: Tuesday, March 20, 2012 5:20 PM To: [email protected] Subject: [j-nsp] Rack mounting a EX4200-48PX, concerned about weight I've got a couple of new EX4200-48PX with dual 930W power supply which have just arrived and I'm quite concerned about the weight of the units in relation to the rack ears. It is the same ears for the EX4200/3200 family. Has anyone racked these before, if so how much sag do you get and do you suggest a shelve underneath? I've seen what a Cisco2811 does and how much it sags and this will be a lot worse. Thanks James _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
