I actually mounted one of these in an older cabinet where the cage nuts were not the tightest fit, but (and I do not advocate this) taking a laptop bag strap along the back of the chassis and up to points on the back of the cabinet to act as a sling to help hold up the back.
Four post rails would probably be the best solution. -b On Tue, Mar 20, 2012 at 3:19 PM, James Baker <[email protected]> wrote: > > > I've got a couple of new EX4200-48PX with dual 930W power supply which have > just arrived and I'm quite concerned about the weight of the units in > relation to the rack ears. It is the same ears for the EX4200/3200 family. > > Has anyone racked these before, if so how much sag do you get and do you > suggest a shelve underneath? > > I've seen what a Cisco2811 does and how much it sags and this will be a lot > worse. > > Thanks > > James > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp -- Bill Blackford Network Engineer Logged into reality and abusing my sudo privileges..... _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
