On Mon, Apr 2, 2012 at 2:24 PM, Jeff Rooney <[email protected]> wrote:
> I have a few SRX650's that are running 10.4R9.2 per the Juniper recommended > release page > http://kb.juniper.net/InfoCenter/index?page=content&id=KB21476 > However, > I just have a few more which came with 11.2R4.3 on them. Just curious as to > what everyone is running on these, should I downgrade the new guys? or > upgrade old? > > The workload on these boxes is nothing crazy, some IPSEC vpn, OSPF with > about 200 routes, firewalling, no cluster...etc. > > Thanks for any input. > > Jeff > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > I still run 11.1R3.5 on several sets of SRX1400s. Then on branch units, I chose to stick with 10.4R6.5 I have to say, no major issues uncovered so far, same stuff as you, IPSec, VPNs, OSPF... -- Brent Jones [email protected] _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
