We're pretty much on 10.4R8.5 back to 6.5 on most boxes.. no major issues. I think we have a couple of boxes on 11.2 code due to features required that weren't present in 10.4 tree.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Brent Jones Sent: Monday, April 02, 2012 5:41 PM To: Jeff Rooney Cc: [email protected] Subject: Re: [j-nsp] SRX recommended software On Mon, Apr 2, 2012 at 2:24 PM, Jeff Rooney <[email protected]> wrote: > I have a few SRX650's that are running 10.4R9.2 per the Juniper > recommended release page > http://kb.juniper.net/InfoCenter/index?page=content&id=KB21476 > However, > I just have a few more which came with 11.2R4.3 on them. Just curious > as to what everyone is running on these, should I downgrade the new > guys? or upgrade old? > > The workload on these boxes is nothing crazy, some IPSEC vpn, OSPF > with about 200 routes, firewalling, no cluster...etc. > > Thanks for any input. > > Jeff > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > I still run 11.1R3.5 on several sets of SRX1400s. Then on branch units, I chose to stick with 10.4R6.5 I have to say, no major issues uncovered so far, same stuff as you, IPSec, VPNs, OSPF... -- Brent Jones [email protected] _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
