Dear Salbeeso, Just try to upgrade the software .
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mohammad Salbad Sent: Sunday, April 22, 2012 2:01 PM To: [email protected] Subject: [j-nsp] dynamic flow control process (High Memory) Hi All We have an M10i router running 10.2R3.10 (512M RAM) ((uptime two years)) with high memory utilization as follow: show chassis routing-engine à Memory utilization 95 percent show system processes extensive à 1317 root 1 96 0 372M 363M select 39:09 0.00% dfcd it has been noted that the dynamic flow control process (dfcd) is taking 372M of the memory. Another thing we've checked another router which was rebooted recently and it was OK,,, memory utilization 45% and dfcd allocation is only 30M Any ideas !!!! Thank you in advance M. Salbad _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
