Hi Mohammad, I agree that an upgrade is your best bet. There is a matching PR: https://prsearch.juniper.net/InfoCenter/index?page=prcontent&id=PR562242
"DFCD memory slowly increasing if running dfcd without any trigger, or without dynamic-flow-capture configuration" Resolved In 10.2R4 10.3R2 10.3R3 10.4R1 11.1R1 HTH -- Graham Brown Twitter - @mountainrescuer <https://twitter.com/#!/mountainrescuer> LinkedIn <http://www.linkedin.com/in/grahamcbrown> On Thu, Apr 26, 2012 at 11:22 AM, Ala' Amira <[email protected]>wrote: > Dear Salbeeso, > > Just try to upgrade the software . > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Mohammad Salbad > Sent: Sunday, April 22, 2012 2:01 PM > To: [email protected] > Subject: [j-nsp] dynamic flow control process (High Memory) > > Hi All > > > > We have an M10i router running 10.2R3.10 (512M RAM) ((uptime two years)) > with high memory utilization as follow: > > show chassis routing-engine à Memory utilization 95 percent > > show system processes extensive à 1317 root 1 96 0 372M 363M > select 39:09 0.00% dfcd > > > > it has been noted that the dynamic flow control process (dfcd) is taking > 372M of the memory. > > Another thing we've checked another router which was rebooted recently and > it was OK,,, memory utilization 45% and dfcd allocation is only 30M > > > > Any ideas !!!! > > > > Thank you in advance > > M. Salbad > > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
