I saw the following exceptions for SRX-series: "VPLS multihoming, which allows connecting a CE device to multiple PE routers to provide redundant connectivity, is not supported on J Series or SRX Series devices"
I'm going to have two SRX's on each site and using vrrp between them, will I hit this exception then? Regards Johan On Wed, Aug 15, 2012 at 5:11 PM, Phil Mayers <[email protected]>wrote: > On 15/08/12 15:29, Johan Borch wrote: > >> Hi, >> >> I have a design question regarding MPLS. >> >> I'm planning to create a MPLS rings with 4-8 SRX240 devices in packet mode >> and the main purpose is L3VPN/VPLS >> >> p1-p2-p3-p4-p5-p1 (p5 connects back to p1) >> >> My budget is low for this and the srx240 is cheap, we will push max 1Gbps. >> > > That should be ok. I've had hundreds of megabits of MPLS out of the SRX210. > > > >> For example in some sites there will be two SRX and the plan is to use >> these two as P/PE and use VRRP for customer equipment. At the same time >> they will be P routers for other sites. >> >> Example site: >> >> P1--------P3-P4----------P5 >> \ / >> (vrrp) >> Customer equipment >> >> Do I make any sense? Will this work? :) >> > > Should do. We use them in similar (but not identical) configurations. > > I've never tested VRRP on them, however. > ______________________________**_________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/**mailman/listinfo/juniper-nsp<https://puck.nether.net/mailman/listinfo/juniper-nsp> > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
