Hello,
I have a pair of MX960 with a simple l2circuit connection. My two PE-PE
interfaces are load sharing the traffic almost perfectly.
However the CE interfaces, which are aggregated interfaces, are only
using one link for egress.
+---------+ +---------+
CE1 --- ae4 | MX960-1 | --- xe-1/1/1 ---- xe-1/1/1 | MX960-1 | --- ae0
--- CE2
+---------+ -- xe-11/1/1 --- xe-11/1/1 +---------+
In this instance, the XE interfaces are load sharing right, while the
ae4 and ae0 are not.
Any ideas?
Thanks,
Abel.
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
