Nevermind, sorry for the noise I think I found the solution at http://www.juniper.net/techpubs/en_US/junos10.3/topics/example/layer-2-s ervices-load-balancing-and-link-aggregation-example.html
Thanks. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Abel Alejandro Sent: Thursday, August 30, 2012 9:07 PM To: [email protected] Subject: [j-nsp] Load balance on AE MX960 Hello, I have a pair of MX960 with a simple l2circuit connection. My two PE-PE interfaces are load sharing the traffic almost perfectly. However the CE interfaces, which are aggregated interfaces, are only using one link for egress. +---------+ +---------+ CE1 --- ae4 | MX960-1 | --- xe-1/1/1 ---- xe-1/1/1 | MX960-1 | --- ae0 --- CE2 +---------+ -- xe-11/1/1 --- xe-11/1/1 +---------+ In this instance, the XE interfaces are load sharing right, while the ae4 and ae0 are not. Any ideas? Thanks, Abel. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
