Maybe you could try to configure next-hop-self on the Cisco's side, on all AFI?
Le 4 sept. 2012 à 13:12, Mihai Gabriel a écrit : > You are partially right. The bgp session is established without > inet6-unicast capability advertised by Juniper, but as soon as Juniper > receives an ipv6 prefix with a native ipv6 next-hop from Cisco, it will > immediately close the session . > > My Cisco router is a route reflector with a lot of clients and some of them > are advertising ipv6 prefixes with a native ipv6 next-hop and also ipv4 > prefixes.In this setup,closing the session will affect all services.. _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
