and move all the traffic through RR? :) On Tue, Sep 4, 2012 at 4:47 PM, Olivier Benghozi < [email protected]> wrote:
> Maybe you could try to configure next-hop-self on the Cisco's side, on all > AFI? > > Le 4 sept. 2012 à 13:12, Mihai Gabriel a écrit : > > > You are partially right. The bgp session is established without > > inet6-unicast capability advertised by Juniper, but as soon as Juniper > > receives an ipv6 prefix with a native ipv6 next-hop from Cisco, it will > > immediately close the session . > > > > My Cisco router is a route reflector with a lot of clients and some of > them > > are advertising ipv6 prefixes with a native ipv6 next-hop and also ipv4 > > prefixes.In this setup,closing the session will affect all services.. > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
