Hi all,
I'm running junos 11.4r5 on an SRX210 device.
I configured a multipoint tunnel interface to bind two IPSEC tunnels to
the same gateway (as multiple proxy IDs are
not supported yet). The remote gateway is an old sonicwall, and is not
capable of route based VPNs.
I tried to setup a static route to the remote network, but the route
doesn't show up.
I found some threads on juniper forums indicating I was not the nly one
to experience this.
Did anyone find a solution to add a static route via a multipoint tunnel
interface ?
Is this working on 12.1 ? (I'd like to keep the 11.4, but if 12.1 could
help ...).
my interface configuration :
root@SRX240# show interfaces st0 unit 0
multipoint;
family inet;
my vpn configurations :
root@SRX240# show security ipsec vpn vpn1
bind-interface st0.0;
ike {
gateway gw1
proxy-identity {
local 10.1.1.0/24;
remote 192.168.1.0/28;
}
ipsec-policy policy1;
}
root@SRX240# show security ipsec vpn vpn2
bind-interface st0.0;
ike {
gateway gw1
proxy-identity {
local 10.1.2.0/24;
remote 192.168.1.0/28;
}
ipsec-policy policy1;
}
does anyone know how to configure multiple proxy id or have a static
route with a multipoint tunnel interface ?
thanks.
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
