Le 14/09/2012 11:51, Mark Menzies a écrit :
How do you route to the remote nets? Do you have the 2 routes set up
on the SRX to send it to the st0 interface? If you do, then we do
need NHTB set up to dictate which VPN the traffic goes down when it
arrives at st0.
There is only one remote net.
Alternatively, set up 2 tunnel interfaces, ie st0.0 and st0.1 and bind
each VPN to its own tunnel interface.
I can use two tunnel interface, and the route to the same network via
those two interfaces, but then as the remote gateway is the same, I
don't have any option to indicate the correct tunnel interface from each
local network.
Also, can you let us know what this reroute error message is?
something like
packet dropped re-route failed
I'll copy the exact message later on.
_______________________________________________
juniper-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/juniper-nsp
