If I follow, then no, a Juni router will not process and act upon the contents of a received RA. It will generate them for use by hosts in auto-conf. As I understand, Juniper sees auto-conf as a process used by dumb hosts and not one that is designed for what should be a "smart" router.
I suppose having routers in a loop of processing the contents of a RA, only to then modify the payload of their own RA before transmitting, only to trigger the same sort of changes at the other end is one issue that we hoped to avoid. HTHs -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Lukasz Martyniak Sent: Thursday, November 08, 2012 12:13 AM To: [email protected] Subject: [j-nsp] ipv6 autoconfiguration and ::/0 Hi all Is it possible to configure router with ::/0 same way as hosts are configured with IPv6 stateless autoconfiguration ? This is what i would like to achieve: R1 --- R2 I have eBGP between R1 and R2. I can advertise only one ipv6 prefix (but not ::/0) to R2 and i can not configure R2. The goal is to force R2 to send all traffic by R1 as a default. Can "router-advertisement" in juniper do the trick ? Best Lukasz _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
