Hi Harry Thank you very much, this is answer which i was looking for.
On Nov 8, 2012, at 5:59 PM, Harry Reynolds wrote: > If I follow, then no, a Juni router will not process and act upon the > contents of a received RA. It will generate them for use by hosts in > auto-conf. As I understand, Juniper sees auto-conf as a process used by dumb > hosts and not one that is designed for what should be a "smart" router. > > I suppose having routers in a loop of processing the contents of a RA, only > to then modify the payload of their own RA before transmitting, only to > trigger the same sort of changes at the other end is one issue that we hoped > to avoid. > > HTHs > > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Lukasz Martyniak > Sent: Thursday, November 08, 2012 12:13 AM > To: [email protected] > Subject: [j-nsp] ipv6 autoconfiguration and ::/0 > > Hi all > > Is it possible to configure router with ::/0 same way as hosts are configured > with IPv6 stateless autoconfiguration ? > > This is what i would like to achieve: > > R1 --- R2 > > I have eBGP between R1 and R2. I can advertise only one ipv6 prefix (but not > ::/0) to R2 and i can not configure R2. The goal is to force R2 to send all > traffic by R1 as a default. > > Can "router-advertisement" in juniper do the trick ? > > Best Lukasz > > > _______________________________________________ > juniper-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/juniper-nsp > > _______________________________________________ juniper-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/juniper-nsp
